| № | Код | Название | Кол-во |
|---|---|---|---|
1 | YOKE,DRIVE OUTPUT-FRONT | ||
10 | NUT, SEC DRIVEN GEAR,22MM | ||
11 | WASHER,22.2X35.8X2.5 | ||
12 | GEAR, SECONDARY DRIVEN | ||
13 | BEARING,NEEDLE ROLLER-W/CUTOUT | ||
14 | SHAFT, SECONDARY DRIVEN - REAR | ||
15 | C-RING-DRIVEN BEARING | ||
16 | SHIM A DRIVEN BEVEL GEAR T=0.6MM | ||
16 | SHIM J DRIVEN BEVEL GEAR T=1.05MM | ||
16 | SHIM I DRIVEN BEVEL GEAR T=1.0MM | ||
16 | SHIM H DRIVEN BEVEL GEAR T=0.95MM | ||
16 | SHIM G DRIVEN BEVEL GEAR T=0.9MM | ||
16 | SHIM F DRIVEN BEVEL GEAR T=0.85MM | ||
16 | SHIM E DRIVEN BEVEL GEAR T=0.8MM | ||
16 | SHIM D DRIVEN BEVEL GEAR T=0.75MM | ||
16 | SHIM C DRIVEN BEVEL GEAR T=0.7MM | ||
16 | SHIM B DRIVEN BEVEL GEAR T=0.65MM | ||
16 | SHIM N DRIVEN BEVEL GEAR T=1.25MM | ||
16 | SHIM K DRIVEN BEVEL GEAR T=1.1MM | ||
16 | SHIM L DRIVEN BEVEL GEAR T=1.15MM | ||
16 | SHIM M DRIVEN BEVEL GEAR T=1.2MM | ||
17 | BEARING,CONRAD-W/SNAPRING | ||
18 | FLANGE, OUTPUT JOINT - REAR | ||
19 | NUT, HEX-COLLLARD (M20X1.5) | ||
2 | CROSS, UNIVERSAL(20mm)-SET (inc. 2) | ||
20 | WASHER THRUST 20MM | ||
21 | GEAR, SECONDARY DRIVE | ||
22 | SHIM DRIVEN BEVEL GEAR T=0.70MM | ||
22 | SHIM DRIVEN BEVEL GEAR T=1.25MM | ||
22 | SHIM DRIVEN BEVEL GEAR T=1.20MM | ||
22 | SHIM DRIVEN BEVEL GEAR T=1.15MM | ||
22 | SHIM DRIVEN BEVEL GEAR T=1.10MM | ||
22 | SHIM DRIVEN BEVEL GEAR T=1.05MM | ||
22 | SHIM DRIVEN BEVEL GEAR T=1.00MM | ||
22 | SHIM DRIVEN BEVEL GEAR T=0.95MM | ||
22 | SHIM DRIVEN BEVEL GEAR T=0.90MM | ||
22 | SHIM DRIVEN BEVEL GEAR T=0.85MM | ||
22 | SHIM DRIVEN BEVEL GEAR T=0.80MM | ||
22 | SHIM DRIVEN BEVEL GEAR T=0.75MM | ||
22 | SHIM DRIVEN BEVEL GEAR T=0.65MM | ||
22 | SHIM DRIVEN BEVEL GEAR T=0.60MM | ||
3 | RING,RETAINING-CROSS | ||
4 | Заменено на: 0817001 | NUT | |
5 | WASH 16 MM | ||
6 | YOKE,PROPELLER SHAFT-ASSY | ||
7 | SEAL,OIL-REAR SECONDARY DRIVEN SHAFT | ||
8 | BEARING,FR SEC DVN SHAFT (4X4) | ||
9 | SHAFT,SECONDARY DVN-FRONT (4X4) |
